Online sykkelbutikk
FIXIE Inc. Backspin | Nye Fixie Inc. Backspin

Chorus 12 Veivsett 12-trinns 34 / 50T

ID: 1019000

4 009 kr
3 689 kr NOK
Mva inkludert., gratis frakt
  • Velg Krankarmlengde
  • Velg Krankarmlengde
    3 689 kr
    Kun 1 produkter på lager
    3 689 kr
    Kun 1 produkter på lager
    3 689 kr
    Kun 1 produkter på lager
Vennligst velg Krankarmlengde
Flytt til din ønskeliste
Produktet har blitt lagt til i din ønskeliste

Dette produktet kan for øyeblikket ikke bestilles i ønsket antall. Sjekk handlekurven.

Produkt anfragen

Jeg ønsker å bli kontaktet når produktet er tilgjengelig igjen.

Vi lagrer din forespørselen i 3 måneder. Skulle produktet komme på lager innen det, kontakter vi deg.
Standard Levering fra 5-7 virkedager

Beskrivelse for

Campagnolo Chorus 12 Veivsett 12-trinns 34 / 50T

The new Chorus crankset is a true concentrate of technology and versatility. It is technically advanced because it uses unidirectional carbon fibre construction technology, which is obtained directly from the mould without surface coating and, like the Record crankset, uses the Ultra-Torque steel bottom bracket axle. It is versatile because its new 123 mm pitch circle, although offering a structure with extreme performance, ensures a wider variety of application segments. The new reduced pitch circle of the Chorus crankset, available with crank arm lengths of 170, 172.5 and 175 mm, makes it compatible with 52/36, 50/34 chainrings and the latest 48/32 rims.

Ultra Torque


6 years after its introduction, Ultra-Tourque is still recognized as the most powerful crankshaft in terms of strength, weight savings and power transmission.
Campagnolo has made sure that the two halves of the bottom bracket axle are inseparably linked to each crank arm. This new development has made it possible to significantly reduce the lateral protrusion of the frame at axle height, thus preventing unwanted contact with the ankle when pedaling.

Their assembly is extremely simple, a single oversize screw is used to firmly connect the two halves of the axle. In terms of the effectiveness of torque transmission, this system can stand up to comparison with a one-piece axle.

Campagnolo has also succeeded, despite the narrow side profile, in placing the bearings outside the bottom bracket housing, so that the axle, which has a larger diameter, becomes stiffer thanks to the increased support width. Campagnolo was able to achieve these characteristics by using the Ultra-Torque, based on the Hirth spur gear, an ingenious mechanical system derived from many years of experience in engine construction in the field of couplings for rotary axles and motor shafts.

It is basically a self-centering and self-aligning spur gear coupling located in the centre of the bottom bracket axle where the ends of the axle halves fixed to the crank arms are in contact.


  • Surface treatment of the chainrings for a longer service life
  • High rigidity and optimum power transmission
  • Symmetrical teeth for the inner chainring
  • Smooth and precise transmission even with extremely diagonal chain positions
  • Optimised design for every chainring combination - maximum performance, always
  • Unaltered Q-factor (145.5 mm) means space requirement and biodynamics of the crank rotation do not change.
Vis alle produkter fra Campagnolo Chorus serien


Tiltenkt bruk
Landevei, Gravel, Endurance
Antall drev: 2 kjederingeroversettelse: 34/50
Kompatibel med gir: 12-deltDesign: 4-ArmetAkselklemme: Ultra TorquePCD: Uten boltsirkelHullsirkel type: CampagnoloKjedelinje: 43.5 mm
Q-Faktor: 145 mm
Medium Kjedering: AluminiumStor Kjedering: AluminiumKrankarm(er): Unidirectional carbon fibres
728 g
Inkludert i leveransen
Inkludert i leveransen: Campagnolo Chorus 12 crank set Ultra-Torque with bearings, without bearing shells



Si din mening. Vær først med å gi en omtale til dette produktet.